Pocket filter, type PFG
Conforms to VDI 6022
Eurovent certification
ATEX construction optional
Pocket filters for the separation of fine dust
Optional equipment and accessories
Application
Classification
Nominal sizes
Filter classes
Filter groups
Filter classes
Construction
Useful additions
Construction features
Materials and surfaces
Standards and guidelines
| Fractional efficiency ePM10 [%] to ISO 16890 | 60 | 75 | – | – | – |
| Fractional efficiency ePM1 [%] to ISO 16890 | – | – | 60 | 75 | 90 |
| Initial pressure difference [Pa] at nominal flow rate | 55 | 70 | 80 | 100 | 140 |
| Recommended final pressure difference [Pa] | 250 – 350 | 250 – 350 | 250 – 350 | 250 – 350 | 250 – 350 |
| maximum operating temperature [°C] for plastic frames | 60 | 60 | 60 | 60 | 60 |
| maximum operating temperature [°C] for frame made of galvanised sheet steel | 90 | 90 | 90 | 90 | 90 |
Changing the filter/Final differential pressure
The aim is to find the optimum of the longest possible service life with energetically low differential pressure and safe hygiene. A fixed, recommended value for the final differential pressure can tempt people to insist on keeping to this value, irrespective of its usefulness and today's standards with regard to, for example, energy saving, sustainability or resource conservation. To save costs and energy, we generally recommend the use of technically high-quality filters with low initial differential pressure and a flat differential pressure curve. In addition, the preferred criterion for a filter change should be the differential pressure. For further information, please refer to the installation and maintenance instructions.
Specification text
Pocket filters PFG made of non-woven glass fibres as prefilters or final filters for the separation of fine dust in ventilation systems. Filter pockets provide a high dust holding capacity at a low initial differential pressure. Pocket filters made of non-woven glass fibres are available in standard and special sizes; variable number of pockets and pocket depth; filter groups ISO ePM10 and ISO ePM1 according to ISO 16890. Pocket filters made of non-woven glass fibres are Eurovent-certified and compliant with VDI 6022 in terms of hygiene. The pocket filters with optional EX protection PFG-EX may be used in areas with potentially explosive atmospheres of zones 1 and 2 as well as zones 21 and 22 (EX II 2G Ex h IIC Gb and EX II 2D Ex h IIIB Db). The filters must be connected to the ground potential. All conductive and dissipative parts must be connected together and grounded. Conductive dusts are excluded from the application. Under no circumstances should metallic foreign materials enter the filter. Ambient temperature range: -40 °C ≤ Ta ≤ +80 °C.
Materials and surfaces
Construction
Sizing data
Life cycle assessment
A life cycle assessment is available for the product series in form of an Environmental Product Declaration (EPD) that has been checked and published by a programme holder.
| PFG | – | ePM1 | – | 90 % | – | PLA | – | 25 | / | 592 × 592 × 600 | × | 8 |
| | | | | | | | | | | | | | | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
Share page
Rekommendera denna sida
Rekommendera denna sida ved att senda en link på mail.
Dela sidan
Tack för din rekommendation!
Din rekommendation har skickats och bör anlända inom kort tid.
Kontakt
Vi är här for dig
Vänligen skriv ditt meddelande och ärende
Kontakt
Tack for ditt meddelande!
Ditt meddelande har skickats och kommer att behandlas inom kort tid. Vår serviceavdelning återkommer til dig så snart vi har möjlighet.
Kontakt
Vi är här for dig
Vänligen skriv ditt meddelande och ärende
Kontakt
Tack for ditt meddelande!
Ditt meddelande har skickats och kommer att behandlas inom kort tid. Vår serviceavdelning återkommer til dig så snart vi har möjlighet.
