MFE

Mini Pleat filter element, type MFE

Eurovent_Filter_Marketing_Highlight.ai.png

Eurovent-Zertifizierung

Eurovent certification

Tested to VDI 6022

Conforms to VDI 6022

Very compact, for modular installation

Prefilters or final filters for the separation of fine dust and particulate filters for the most critical requirements in ventilation systems

Filter groups ISO ePM1 (fine dust filter) and EPA, HEPA (particulate filter)
Performance data tested according to ISO 16890 or to EN 1822-1 and ISO 29463-2 to ISO 29463-5
Eurovent certification for fine dust filters
Filter media for special requirements, made of glass fibre papers, with spacers made of textile threads
Low initial differential pressure due to ideal pleat position and largest possible filter area
Meets the hygiene requirements of VDI 6022

Introduction

Application

Mini Pleat filter element type MFE for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems with large volume flow rates and the requirement for long filter life
Fine dust filter: Prefilter or final filter for the separation of fine dust in ventilation systems.
Particulate filter: Main or final filter used for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering

Special characteristics

Leakage test, standard for all particulate filters of filter class H13

Classification

Eurovent certification for fine dust filters

Nominal sizes

B × H × D [mm]

Description

Filter classes

Filter groups
▪ ISO ePM1 to ISO 16890
▪ EPA according to EN 1822
▪ HEPA according to EN 1822

Filter classes
▪ ePM1 90 %
▪ E11
▪ H13

Construction

GAL: Frame made of galvanised steel
AL: Frame made of aluminium

Accessories

Adhesive tape for sealing off the filter elements, width: 19 mm, length: 55 m
One roll suffices for about 50 filter elements of size 600 × 65 × 202 mm, for about 100 filter elements of size 86.5 × 202 × 600 mm, or for about 70 filter elements of size 86.5 × 303 × 600 mm
Order number: ACC-AT

Construction features

Compact wedge design
The filter elements are joined together by a special adhesive tape which also provides an air-tight seal between the filter elements and the mounting frame or installation casing
The special adhesive tape for sealing off the filter elements must be ordered separately

Materials and surfaces

Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
Spacers provide a uniform spacing of the pleats
Joint sealing compound made of permanently elastic two-component polyurethane adhesive
Frame made of either galvanised sheet steel or aluminium

Standards and guidelines

Test according to ISO 16890; international standard for general room air distribution; classification of arrestance efficiency based on the measured fractional arrestance efficiency, which is processed into a reporting system for the fine dust arrestance efficiency (ePM)
For fine dust filters, the fractional arrestance efficiency of a certain size range is determined by aerosols (DEHS and KCl)
The filters are classified into filter group ISO aPM1 depending on the tested values
Testing of particulate filters to EN 1822 (EPA, HEPA and ULPA filters): European standard for the testing of filtration performance in the factory, particle counting method using a liquid test aerosol
Uniform classification of particulate filters according to efficiency, using a test aerosol whose average particle size lies within the minimum efficiency (MPPS)
Particulate filters are classified according to the values determined for the local filtration efficiency and the overall filtration efficiency as EPA (filter classes E10, E11, E12), HEPA (filter classes H13, H14) or ULPA (filter classes U15, U16, U17)
Hygiene conformity: VDI 6022, VDI 3803, DIN 1946 Part 4,ÖNORM H 6020, SWKI VA 104-01 and SWKI 99-3 and EN16798

Teknisk information

Technical data, Specification text, Order code, Related products

Fractional efficiency ePM10 [%] to ISO 16890	90
Initial differential pressure [%] at nominal volume flow rate for nominal size 600 × 65 × 202 mm	50
Recommended final differential pressure [%] for nominal size 600 × 65 × 202 mm	250
Initial differential pressure [Pa] at nominal volume flow rate for nominal sizes 86.5 × 202/303 × 600 mm	120
Recommended final differential pressure [Pa] for nominal sizes 86.5 × 202/303 × 600 mm	300
Max. operating temperature [°C]	100
Maximum relative humidity [%]	100

Filter class according to EN 1822	E11	H13
Efficiency [%] according to EN 1822	> 95	> 99.95
Initial differential pressure [%] at nominal volume flow rate for nominal size 600 × 65 × 202 mm	140	160
Recommended final differential pressure [%] for nominal size 600 × 65 × 202 mm	400	400
Initial differential pressure [Pa] at nominal volume flow rate for nominal sizes 86.5 × 202/303 × 600 mm	190	220
Recommended final differential pressure [Pa] for nominal sizes 86.5 × 202/303 × 600 mm	600	600
Max. operating temperature [°C]	100	100
Maximum relative humidity [%]	100	100

Specification text

Mini Pleat filter elements MFE for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems. Use as fine dust filters, i.e. as pre-filters or final filters in ventilation and air conditioning systems; or as particulate filters, i.e. main or final filters for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering. Large volume flow rates and long filter life due to the very compact, modular structure. Filter media of high-quality, moisture-resistant glass fibre papers with spacers. Low initial differential pressure due to ideal pleat position and largest possible filter area. Mini Pleat filter elements available in market sizes, filter groups ISO ePM1 (fine dust filter) and EPA, HEPA (particulate filter). The filter elements are joined together by a special adhesive tape which also provides an air-tight seal between the filter elements and the mounting frame or installation casing. The special adhesive tape must be ordered separately. Mini Pleat filter elements used as fine dust filters are certified by Eurovent. Mini Pleat filter elements MFE hygienically conform to VDI 6022.

Special characteristics

Leakage test, standard for all particulate filters of filter class H13

Materials and surfaces

Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
Spacers provide a uniform spacing of the pleats
Joint sealing compound made of permanently elastic two-component polyurethane adhesive
Frame made of either galvanised sheet steel or aluminium

Construction

▪ GAL: Frame made of galvanised steel
▪ AL: Frame made of aluminium

Sizing data

Filter group [ISO 16890]
Efficiency [%]
Filter class [EN 1822]
Volume flow rate [m³/h]
Initial differential pressure [Pa]
Nominal size [mm]

MFE	–	ePM1	–	90%	–	GAL	/	600 × 65 × 202
\|		\|		\|		\|		\|
1		2		3		4		5

1 Type
MFE Mini Pleat filter element

2 Classification
ePM1 Fractional efficiency ePM1 to ISO 16890
E11 Particulate filter according to EN 1822
H13 Particulate filter according to EN 1822

3 Efficiency [%]
according to ISO 16890 (not with E11 and H13)

4 Construction
GAL Frame made of galvanised steel
AL Frame made of aluminium

5 Nominal size [mm]
B × H × T

MFE–H13–GAL/600×65×202
Filter class H13 particulate filter according to EN 1822
Construction Frame made of galvanised steel
Nominal size 600 × 65 × 202 mm

Dimensions

Dimensions MFE - Height 202/203

①				②		③	④	⑤
B [mm]	H [mm]	T [mm]	Filter class	qv [l/s]	qv [m³/h]	ΔpA [Pa]	m²	kg
600	65	202	ePM1 90 %	56	200	50	3,4	1,2
86,5	202	600	ePM1 90 %	56	200	120	3,4	1,4
86,5	303	600	ePM1 90 %	83	300	120	5,1	1,5
600	65	202	E11	56	200	140	3,6	1,2
86,5	202	600	E11	56	200	190	3,6	1,4
86,5	303	600	E11	83	300	190	5,4	1,5
600	65	202	H13	56	200	160	3,6	1,2
86,5	202	600	H13	56	200	220	3,6	1,4
86,5	303	600	H13	83	300	220	5,4	1,5